蚂蚁矿机运行一段时间0Hashrate,重启能恢复Hashrate

故障现象:矿机运行一段时间0Hashrate,重启能恢复Hashrate。

可能原因及解决办法:

1. 机器高温保护导致Hashrate为0

检查确认矿机后台温度显示在正常范围内:

检查矿机后台日志,高温保护会有相应提示:

a、Tempertature is higher than 85 ‘C for 1 time

b、Tempertature is too high!

c、Temp Err! Please Check Fan! Will Disable PIC!

d、temp too high!

注意:高温保护的机器,务必关机十分钟以上再开机,并且改善该机器位置的温度情况。

2. 温度确认无异常,有可能是电源问题

如出现下图所示芯片打×的情况,请尝试更换电源或者检查交流电源输入是否较低,确定电源输入电压在210V-240V之间。

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *